Brass angle valve

DN1=1/2" DN2=1/2" A=9 B=9 L=79.5 MATERIAL: 1. Body BRASS 2.BonnetBRASS 3.Cartridge BRASS 4.WasherNBR 5.Stem BRASS 6. O-ring NBR 7.ScrewIRON 8.Press nutBRASS 9.Handle ZINC 10.Blue cap ABS TECHNICAL REQUIREMENT: 1. Before assembling, all parts should be clean, no oil or grease. Remove all burrs and sharp edges. 2. Before connecting, body cap male thread should be coated with sealing glue. 3. Handle turn or close freely. OTHER SIMILAR PRODUCTS Brass angle balve Size: 1/2" X 1/2" Brass angle balve Size: 1/2"x1/2" Brass angle valve Size: 1/2"x1/2" Brass angle balve 1/2"x1/2"x3/4" Brass angle valve 1/2"x3/4"x3/8"